10 Core 1.5mm2 Flexible Control Cables PVC Insulated 450/750V For Industrial Applications
| Corporation: | Minfeng Cable Group | Cabletype: | Control Cable |
| Sample: | Available | Type: | Low Voltage, KVV/KVVP/KVVR/KYJV |
| Conductor Shape: | Round | Outerjacketmaterial: | PVC / Polyethylene / Nylon |
| Application: | Automotive, Marine, Industrial Machinery | Material Shape: | Round Wire |
| High Light: | 1.5mm2 Flexible Control Cables,Flexible Control Cables PVC Insulated,10 Core Control Cable 750V |
||
This 450/750V 10-core 1.5mm² PVC insulated flexible control cable is designed for industrial control, signal, protection, and measurement system wiring applications.
Polyvinyl chloride insulated control cable used for control, signal, protection and measurement system wiring in fixed installation applications.
Copper core PVC insulated control cables for indoor installation, cable trenches, pipes and other applications requiring bending, movement, and shielding. Used for signal transmission, control and measurement of monitoring circuits, protection circuits, electrical instruments and power distribution devices.
Shielded control cable suitable for control and monitoring circuits rated 450/750V and below, primarily designed to prevent electromagnetic wave interference in environments requiring electromagnetic shielding.
Designed for applications requiring bending and movement within rooms, ducts, pipes and similar environments. Used for signaling control, monitoring and protection circuit lines, electrical instruments, and power distribution units.
| Component | Specification |
|---|---|
| Standard | GB9330.2 |
| Conductor | KVV(KVVP): GB/T3956 Type 1 and Type 2 Stranded Conductor KVVR: GB/T3956 No. 5 stranded conductor KVVRP: GB/T3956 No. 5 stranded conductor |
| Insulation | KVV: PVC/A type PVC insulation for rigid structure cable (fixed laying) KVVP: Hard structure cable PVC/A type PVC insulation (fixed laying) KVVR(KVVRP): PVC/D type polyvinyl chloride insulation for flexible structure cables (mobile applications) |
| Core Structure | Allows filling of gaps between core wires with optional isolation layer (PP tape or non-woven wrap) |
| Jacket | KVV(KVVP): Hard structure PVC sheath for fixed laying (PVC/ST1) KVVR: PVC/ST5 polyvinyl chloride sheath KVVRP: PVC/ST5 polyvinyl chloride sheath in black (RAL9005) or gray (RAL7001) |
| Screen | KVVP: Braided round copper wire or tinned round copper wire KVVRP: Round copper wire or tinned copper braid |
| Parameter | Specification |
|---|---|
| Rated Voltage | U0/U 450/750V |
| Test Voltage | Insulation thickness ≤ 0.6mm: 2000V Insulation thickness ≥ 0.6mm: 2500V External test: 3000V |
| Minimum Bending Radius | KVV Fixed installation: 6*D (cable outer diameter) KVV Mobile installation: 12*D (cable outer diameter) KVVR Fixed laying: 12*D (cable outer diameter) KVVR Mobile installation: 6*D (cable outer diameter) KVVP Fixed laying: 12*D (cable outer diameter) |
| Operating Temperature | Fixed laying: -10℃ to +70℃ Mobile installation: -5°C to +70°C |
| Radiation Resistance | 8*10⁷ cJ/kg |
| Flame Retardancy | Passes GB/T18380 flame retardant test |
Control cable cores are copper with the following configurations:
- Nominal cross section 2.5mm² and below: 2-61 cores
- 4-6mm²: 2-14 cores
- 10mm²: 2-10 cores
Control cables used in computer systems typically utilize polyvinyl chloride, polyethylene, cross-linked polyethylene, and fluoroplastic insulation products.
-
AInternational shipping can be rough, but the reinforced wooden drumming used by this supplier ensured the cable arrived in pristine condition without any kinks.
-
ETheir engineering team was extremely helpful in customizing the shielding for our specific industrial interference requirements.
-
KThe copper purity in these power cables is evident. We’ve seen a measurable improvement in conductivity compared to our previous domestic suppliers.
