U1000 ARVFV Aluminum Core Steel Tape Armoured Cable XLPE 3x300+1x150+1x25mm 3x300+2x25mm NFC 32-322 IEC 60502 Standard

The main function of XLPE Insulated Power Cable is to transport electricity, which is suitable for use in power distribution networks or fixed installations for industrial equipment operating at rated voltage up to and including 0.6/1, 1.8/3, 3.6/6, 6/10, 8.7/10, 8.7/15, 12/20, 21/35, 26/35kV with alternating current (AC) 50Hz.

This product is typically used under normal conditions and is not suitable for special applications such as overhead, underwater, ship, submarine, or nuclear power station installations.

XLPE insulated flame-retardant power cable provides excellent fire prevention performance, helping to avoid fire accidents and losses. It is ideal for high-density installations in locations such as subways, tunnels, and high-rise buildings.

XLPE polyethylene insulated low-smoke zero-halogen flame-retardant power cables are environmentally friendly products with superior flame-retardant, corrosion resistance, and low-smoke properties, making them suitable for crowded places like subways, shopping malls, and schools.

XLPE polyethylene insulated power cables are manufactured using a parasitical cross-linking procedure that transforms straight-chain polyethylene into a network structure, converting thermoplastic material into thermosetting material. This allows for a working temperature of up to 90°C, significantly increasing cable current capacity.

These cables offer excellent electrical characteristics, heat resistance, chemical resistance, environmental stress cracking resistance, and aging resistance, ensuring a long service life.

Compliance Standards: GB/12706-2008, IEC60502-1, IEC 60228, IEC60332, BS 5467, IS 1554, IS 7098, etc.

We can also design and produce cables for special application requirements.

• Rated Voltage (U0/U(Um)): 0.6/1(1.2) kV with core configurations: 1, 2, 3, 4, 5, 3+1, 4+1, 3+2 and nominal cross-section: 1.5-630mm²
• Conductor Temperature: Maximum continuous operating temperature: 90°C; Short-circuit temperature: 160°C (not exceeding 5 seconds)
• Ambient Temperature: Installation temperature should not be lower than 0°C (preheating required if lower)
• Bending Radius: Single core cable: 20(d+D) ±5%; Multi-core cable: 15(d+D) ±5% (where d = conductor diameter, D = cable outer diameter)

• Conductor Shapes: RE = circular solid, CC = compacted circular stranded, SM = sector shaped stranded
• Conductors: Plain circular, compacted or shaped stranded copper or aluminium conductor
• Insulation: XLPE (cross-linked polyethylene) rated at 90°C
• Color Identification:
  • 1 Core: Red or Black
  • 2 Cores: Red, Black
  • 3 Cores: Red, Yellow, Blue
  • 4 Cores: Red, Yellow, Blue, Black
  • 5 Cores: Red, Yellow, Blue, Black, Green
  • Above 5 Cores: Black Cores with White numerals
• Assembly/Inner Sheath: Two, Three or Four insulated conductors laid-up with non-hygroscopic fillers and bedded with extruded PVC layer
• Armour: Aluminum/Galvanized Steel Wires or Steel Tapes applied helically
• Outer Sheath: Extruded PVC Type ST2 (IEC 60502-1) or Type 9 (BS 6346/5467)

Special sheathing materials including Fire Retardant PVC, Anti-Termite PVC, Anti-Rodent PVC, Sunlight resistant PVC, Oil Resistant PVC, LLDPE, MDPE, HDPE, LSZH, and CPE are available upon request.

Packaged on wooden drums for secure transportation and storage.