ZR Flame Retardant Armoured Copper Control Cables 4x10mm² Cross Section For Fixed Laying
| Corporation: | Minfeng Cable Group | Cabletype: | Control Cable |
| Sample: | Available | Type: | Low Voltage, KVV/KVVP/KVVR/KYJV |
| Conductor Shape: | Round | Outerjacketmaterial: | PVC / Polyethylene / Nylon |
| Application: | Automotive, Marine, Industrial Machinery | Material Shape: | Round Wire |
| High Light: | Copper Control Cables,Fixed Laying Control Cables,Flame Retardant Armoured Copper Cable |
||
KVV22 steel armored control cables (KVVP2-22 copper tape shielded steel tape armored control cable) are designed for fixed installation in chambers, ducts, pipes, and direct burial applications. These cables are used for signaling control, monitoring, and protection circuit lines in electrical instruments and power distribution units.
KVV32 steel wire armored control cables are laid in fixed locations including indoors, cable trenches, pipelines, direct burial, and shafts. They are used for signal transmission, control and measurement of monitoring circuits, protection circuits, and electrical instruments in power distribution systems.
| Standard | GB9330.2-2008 (GB9330.2) |
| Conductor | Comply with GB/T3956 type 1 and type 2 stranded conductors |
| Insulation Material | Hard structure cable PVC/A type PVC insulation for fixed laying |
| Cores | Allows to fill the gap between core wires, optional, with isolation layer wrapping (PP tape or non-woven wrap optional) |
| Jacket | ST1 PVC sheath |
| Screen | 0.05 ~ 0.10mm soft copper strip overlap wrapping |
| Armored | Thickness of painted steel or galvanized steel armor of 0.2mm, meeting GB/T2952.1 requirements (KVV32: Steel wire armor around package, compliant with GB/T2952.1) |
| Rated Voltage | U0/U 450/750V |
| Test Voltage | Insulation thickness ≤ 0.6mm: 2000V Insulation thickness ≥ 0.6mm: 2500V |
| Minimum Bending Radius | Fixed laying: 12*D (outer diameter of cable) |
| Operating Temperature | Fixed laying: -10℃ to +70℃ Mobile installation: -5°C to +70°C |
| Radiation Resistance | 8*10⁷ cJ/kg |
The control cable features copper cores with the following configurations:
- Nominal cross section 2.5mm² and below: 2–61 cores
- 4–6mm²: 2–14 cores
- 10mm²: 2–10 cores
Control cables used in computer systems typically utilize polyvinyl chloride, polyethylene, cross-linked polyethylene, and fluoroplastic insulation products.
| Model | Main Scope of Application |
| KVV | Laid indoors, fixed occasions such as cable trenches and pipes |
| KVV22 | Laying indoors, cable trench, buried pipelines can bear greater mechanical force fixed installation |
| KVVP | To lay claim chamber, ducts, pipes and the like shield |
| KVVR | Laid indoors, where occasions require movement |
| KVVRP | Placed indoors, where mobile shielding is required |
| ZRKVV | Laid indoors, cable trenches, pipes and other fixed occasions requiring flame resistance |
| ZRKVV22 | Lay indoors, cable trenches, pipelines, etc. can be buried in fixed occasions that can withstand large mechanical external forces and have flame retardancy requirements |
| ZRKVVP | Laid indoors, cable trenches, pipes and other fixed occasions requiring shielding and flame retardant |
| ZRKVVR | Laid indoors where mobility and flame retardant requirements are required |
| ZRKVVRP | Placed indoors, where mobile shielding and flame retardant requirements are required |
-
AInternational shipping can be rough, but the reinforced wooden drumming used by this supplier ensured the cable arrived in pristine condition without any kinks.
-
MIn an industry plagued by shortages, this manufacturer’s ability to maintain a steady lead time is a massive asset to our supply chain.
-
CWe’ve integrated these fiber optic cables into our latest data center project. The attenuation levels are remarkably low, exceeding our performance benchmarks.
